Last Updated: August 27, 2026
This Lead-Safety and Professional Services Disclaimer applies to information, training, and field services provided by LeadShield LLC (“LeadShield,” “we,” “us,” or “our”) through this website and in connection with our RRP training, lead testing, lead-safe jobsite services, continuing education information, and related resources.
Lead-based paint work can involve health, safety, environmental, licensing, and regulatory requirements. Contractors, firms, property managers, maintenance professionals, and paid tradespeople remain responsible for complying with all requirements that apply to their specific work.
RRP Requirements for Paid Contractors
Utah’s Renovation, Repair and Painting requirements apply to many paid renovation, repair, and painting activities that disturb painted surfaces in covered pre-1978 housing, rental units, childcare facilities, schools, and similar properties.
Covered professionals can include general contractors, residential rental property owners and managers, painters, plumbers, carpenters, electricians, maintenance personnel, sole proprietors, and other specialty trades.
LeadShield website content should not be interpreted as making RRP compliance optional when the rule applies to a project.
Contractor Responsibility for Compliance
LeadShield provides training, information, and field support, but responsibility for regulatory compliance remains with the contractor, firm, certified renovator, property professional, or other party performing the regulated work.
Each firm is responsible for determining:
- Whether the property and project are covered
- Whether an applicable exclusion applies
- What certification is required
- Which painted components will be disturbed
- What work practices must be followed
- Which records must be maintained
General website information cannot replace a project-specific review of applicable requirements.
Firm Certification Is Separate From Individual Certification
Utah treats firm certification and individual renovator certification as separate requirements.
Companies performing regulated renovation activities for compensation must apply to the Utah Division of Air Quality for firm certification. Utah uses the ATLAS system for company and individual applications.
An individual’s training or certification does not automatically certify the company for which that person works.
RRP Training Does Not Complete Utah Certification
Successfully completing an accredited RRP training course and receiving a course-completion certificate is not, by itself, the final step required for Utah renovator certification.
Utah requires individuals to complete the applicable training and then submit the required certification application and Citizenship Certification Form to the Utah Division of Air Quality.
LeadShield includes guidance on the ATLAS application process to help students understand what comes after class.
Each attendee remains responsible for completing the state application accurately and satisfying all applicable Utah requirements.
ATLAS Application Guidance
LeadShield may provide instructions and practical guidance concerning the Utah ATLAS certification process.
This guidance is intended to help attendees understand the state application steps. LeadShield does not operate ATLAS and cannot control:
- Utah DAQ processing times
- Application decisions
- State fees
- Documentation requirements
- Changes to agency procedures
- Approval or denial of certification
Providing application guidance does not guarantee certification.
RRP Refresher Training
Utah’s guidance identifies an accredited 4-hour refresher course every five years as part of maintaining individual renovator certification.
Certified renovators are responsible for monitoring their certification status and completing applicable refresher and renewal requirements on time.
LeadShield cannot guarantee that refresher training will correct an already expired or otherwise deficient certification status.
Lead Testing and RRP Compliance
Paint testing itself is not required in every situation under the RRP framework.
However, contractors performing covered work cannot simply assume that affected painted components are lead-free. When there is no qualifying lead-free determination or other applicable exclusion, the project must proceed under the applicable RRP requirements.
When testing is used to determine whether affected components contain lead-based paint, the testing must be performed by an appropriately qualified professional using an accepted method within that person’s authorized scope.
Scope of Lead Testing
LeadShield provides renovation-focused lead testing only within the scope of its verified services and credentials.
Testing may be limited to the painted components or work areas identified as part of the agreed service.
A result concerning one surface, room, component, or work area should not automatically be interpreted as establishing that an entire property is lead-free.
No Comprehensive Inspection Unless Specifically Stated
LeadShield does not broadly represent its lead testing as a comprehensive lead-based paint inspection, risk assessment, clearance examination, XRF service, or laboratory analysis.
Those services may involve separate qualifications, certifications, methods, or regulatory requirements.
If a project requires a service outside LeadShield’s verified scope, an appropriately qualified professional may be needed.
Lead-Free Determinations and Exclusions
Utah recognizes certain circumstances in which RRP requirements may not apply, including qualifying lead-free determinations and certain minor repair and maintenance activities.
Contractors should not assume an exclusion applies without confirming that the project actually meets the applicable conditions.
Window removal and demolition of painted surfaces remain subject to the rule regardless of the ordinary minor-repair surface-area thresholds described in the Utah guidance.
Lead-Safe Jobsite Requirements
Covered RRP projects require specific lead-safe work practices.
Utah identifies requirements that include defining the work area, keeping unauthorized persons outside it, isolating the renovation area, containing renovation waste, and cleaning the work area after renovation is complete.
LeadShield may provide jobsite setup, containment, teardown, and cleanup support within the agreed service scope.
Contractor and Certified Renovator Responsibilities
LeadShield’s jobsite services do not transfer regulatory responsibility from the certified renovation firm or assigned certified renovator.
Utah requires regulated firms to maintain appropriate certification, assign a Utah-certified renovator to covered projects, and ensure workers are either certified or appropriately trained by a certified renovator.
The certified renovator also has responsibilities related to worker instruction, project supervision, availability during key stages, and cleanliness verification.
Prohibited and Restricted Work Practices
Certain high-risk practices are prohibited or restricted under Utah lead-based paint requirements.
The Utah guidance identifies practices including open-flame burning or torching and specified sanding, grinding, needle gunning, or blasting performed without required controls.
LeadShield training or jobsite support does not relieve contractors of the responsibility to understand and avoid prohibited practices.
Lead-Safe Cleanup
Lead-safe cleanup is an important part of covered renovation work.
LeadShield may provide applicable teardown and cleanup support within the agreed service scope, but cleanup should not be interpreted as a comprehensive clearance examination unless that service is expressly identified and provided by an appropriately qualified professional.
No cleanup service can guarantee that every trace of lead or lead-containing material has been removed from an entire property.
No Lead Abatement Representation
LeadShield’s renovation-related field services should not be interpreted as lead abatement unless LeadShield expressly identifies and is qualified to provide that specific service.
Lead-safe renovation work and lead abatement are distinct activities that may be subject to different regulatory requirements.
LeadShield’s current website services focus on renovation-related testing, containment, setup, teardown, and cleanup support.
Continuing Education Disclaimer
Continuing education hours may be available for eligible attendees and applicable licensing programs.
CE eligibility, available hours, reporting requirements, and fees may vary.
Continuing education credit is separate from Utah renovator certification and does not replace RRP training, refresher requirements, firm certification, or the Utah DAQ application process.
No Legal or Regulatory Advice
LeadShield may explain RRP requirements and Utah certification procedures as part of training and service information.
This does not constitute legal advice.
Contractors and firms remain responsible for determining their own regulatory obligations and should consult Utah DAQ, EPA, or an appropriately qualified professional when clarification of a specific legal requirement is needed.
No Medical Advice
Lead exposure can create serious health risks.
LeadShield does not provide medical diagnosis, medical testing, treatment, or individualized health advice.
Anyone concerned about actual or suspected lead exposure should contact an appropriate healthcare provider or public health authority.
No Environmental Assessment Beyond the Service Scope
LeadShield services do not constitute a comprehensive environmental assessment of a property.
Unless expressly agreed and supported by the appropriate qualifications, LeadShield does not evaluate unrelated conditions such as asbestos, mold, radon, contaminated soil, or other environmental hazards.
Property and Project Information
Customers and contractors are responsible for providing accurate information relevant to the requested service.
This may include:
- Property age
- Planned renovation activities
- Affected painted components
- Existing testing or lead-related documentation
- Known project hazards
- Worksite access conditions
- Project schedule
Previously unknown site conditions may require LeadShield to modify, postpone, or stop the agreed service.
Contractor and Third-Party Work
LeadShield may coordinate with independent contractors, property managers, training venues, or other professionals.
Unless specifically agreed otherwise, LeadShield is not responsible for the workmanship, regulatory compliance, scheduling, or decisions of independent third parties.
Each contractor and professional remains responsible for work performed within their own scope.
No Guarantee of Regulatory Outcome
LeadShield cannot guarantee the outcome of:
- Utah DAQ certification applications
- ATLAS submissions
- Government inspections
- Licensing reviews
- Continuing education determinations
- Contractor audits
- Property transactions
- Enforcement decisions
Government agencies and licensing authorities make their own determinations under applicable law.
Regulatory Information May Change
Lead-based paint rules, application procedures, fees, forms, and agency requirements may change over time.
Utah’s DAQ guidance states that regulated parties remain responsible for complying with the current Utah Lead-Based Paint Administrative Rules.
LeadShield may update website information as requirements change, but contractors should confirm current rules when making compliance decisions.
Separate Agreements and Policies
Individual training registrations, estimates, invoices, work orders, or service agreements may contain additional terms specific to a course or project.
LeadShield’s Terms and Conditions, Training Registration, Cancellation and Refund Policy, and Privacy Policy may also apply.
Where a transaction-specific written agreement addresses a matter differently, that agreement will control to the extent permitted by law.
Changes to This Disclaimer
LeadShield may update this Lead-Safety and Professional Services Disclaimer as training programs, services, regulatory requirements, or business practices change.
The “Last Updated” date at the top of this page will be revised when material changes are made.
Contact LeadShield
Questions about LeadShield training, lead testing, lead-safe jobsite services, or the scope of a particular service may be directed to:
LeadShield LLC
Based in Herriman, Utah
Phone: (385) 462-7900
Mobile and off-site services are provided by appointment. No walk-ins.